Foco Two 800

Foco Two 800 – Built-in Tunnel Bio Fireplace

Foco Two 800 is a two-sided see-through bioethanol fireplace that allows you to see the fireplace flame from two opposite sides. Foco Two is therefore ideal for installing in a partition wall or room divider between eg. living room and kitchen.

Bioethanol Burner

It’s possible to choose between 3 different bioethanol burners for Foco Two:

Burner	Superior 60 cm	PrimeFire 700	Denver Basic F3 – 720
Flame length	45 cm	50 cm	50 cm
Heat output	1,6 – 3,3 kW	2,2 – 4,4 kW	1,2 – 3,2 kW
Control	Manual	Remote control	Remote control
Flame level	Manual adjustable	2	3
Capacity	3,5 litres	1,9 litres	4 litres
Burn time	7,5 hours	4,5 hours	7,3 – 20 hours
Electricity	No	Yes	Yes

The automatic burners makes it possible to control the burner with a remote control and has several extra safety sensors, which automatically can turn off the burner. But be aware, that automatic burners has to be connected to power.

Are you in doubt about which burner to chose, then you can read our: Guide for Foco burners.

Materials

Foco Two is made of 4 mm thick stainless steel, which has been powder coated black. This gives the bioethanol fireplace a neutral and timeless design that lets the flames be in focus.

Furthermore, tempered glass is included, which is mounted around the flame. In addition to looking great, the glass shields the flames from draft and small gusts of wind, which helps to provide a more stable flame. However, it is possible to choose not to mount the glass if desired.

Accessories

The Foco fireplaces have a variety of accessories available as a supplemental purchase. These range from general accessories and decorations to exclusive Foco accessories designed to help conceal screws and transition from wall to fireplace.

Included in the package

• Bioethanol burner (Manual or Automatic)
• Foco Two frame in four parts
• Screws and nuts to assemble the frame
• 2x tempered glass (height 10 cm)
• 4x glass holders

Installation of Foco Two 800

The installation of Foco Two is relatively easy if you have a little technical skill and do not require any special certification. You can, therefore, carry out the installation yourself.

If you build the fireplace into a flammable wall, you should heat-insulate between the fireplace and the wall. For this, we recommend heat-insulating plates such as Skamotec Fire Boards.